Auto-loader;

1: Main machine separated from the hopper, easy and safe to operate

2: Microcomputer controlled

3: Alarm for lack of material

4: Equipped with high-speed motor with small size and strong suction power, suitable for different types of raw material

5: Equipped with induction motor with low speed and high stability

Chiller;

1: Phase loss and phase reverse, low pressure, anti-frozen and over load protection

2: Compressor start delay

3: Top brand compressors are used

4: Controlled by micro-computer, temperature control range is from +5℃ to +35℃, and the accuracy can reach ±0.2℃

5: Specially designed condenser and evaporator brings higher exchange rate

6: Stainless steel made water tank is easy to clean

7: Ultra low temperature model is optional and can reach -15℃.

8: A410 and R407C is optional

Crusher

1: Equipped with full hard tooth surface gear motor, stable performance, long life and large transmission torque

2: The knifes are coaxially designed, Coarse crushing and fine crushing can carry out simultaneously, evenly crushed, with little dust, can be mixed with new materials immediately

3: The motor and the main shaft are connected by a coupling to make the machine run smoothly and easier to replace the motor

4: The feeding box is made of double-layer soundproof stainless steel, noise reduction, durable and pollution-free

5: No screen design, evenly pulverized particles, little powder content

Dehumidifying＆Drying＆Loading 3 in 1

1: The compact designed 3 in 1 machine ensures the material are dried in the closed-loop system, prevent external air contact and perform drying effective.

2: Microprocessor P.I.D control with overheating protection. Motor overload, phase reversal and time delay cooling protection.

3: PLC touch screen control with available (optional) display operational condition, trouble shooting and maintenance instruction.

4: -40℃ Dew-point ensure material completely dried.

5; Bottom air flow release designed to prevent heat loss and increased drying efficiency. Double insulation hopper prevents heat loss and maintain regular temperature.

Euro-Dryer＆Loader 2 in 1

1: Material is dried in a closed system, this design can avoid material contacting with outer air and getting humid again

2: Machine is controlled by micro computer system, with protection of overheat, motor overload, blower phase reverse, blower delay off.

3: The thermal insulation drying barrel adopts the design of the downward blowing pipe

Honeycomb dehumidifier

1: P.I.D temperature controlling system adopted, with displays of regeneration temperature and real temperature

2: Rotation speed of Honeycomb adjustable

3: Dew-point up to -40℃, lower dew-point available with enhanced configuration.

4: PLC control and LCD touch screen control available.

5: Dew-point meter to supervise the dehumidifying effect (optional).

6: Small foot-print, easy to move

Hopper dryer

1: Material tank installed with side glass for inspection.

2: High-temperature type for 50-1000kg available, with double-walled hopper tank, stainless steel heating tube and high-temperature blower.

3: Hopper specially designed for easy opening, suitable for all robots.

Temperature controller

1: Anti-explosion design in piping

2: Isolated control box, to ensure longer using time of electric parts.

3: Main electric parts: SIEMENS

4: Temperature controlling: micro-computer double PID mode.

5: Safety protection: phase loss, phase reverse, over heat, over load, over pressure, media shortage, controller default.